At present, and accuracy of the hydraulic system have dramatically developed, and it is incraesingly required higher performance of hydraulic products.
Eaton Fluid Power introduces Orbit motor and Orbitrol steering control unit which have compact and unique structure, Dowmax motor has low speed performance, light and compact Gear pump /Gear motor and Stack valves, integrated Power pack with elctric motor,pump and valve.
We also introduce a variety of Vickers products of vane pump, piston pump,cartridge valve and control valve which are well received for its high quality and a variety of Aeroquip products which are distinctive for Hose and Connector. We meet your demands with abundant technology and service of Eaton group.
  The original ORBIT motor, developed by the Char-Lynn Company of U.S.A.(now Eaton Corp.) to implement a unique operating principle, has
 
Light-weight and compact : This motor does the internal organs of a unique slowdown organization and can install it for a small space.
External case drain piping unnecessarily : The special high-pressure shaft seal permits high back pressure without an external case drain at almost all application
We have a series of 8 kinds with J 2 series to 10000 series.
A large quantity of motor option
Shaft Rotation Flexibility

  Dowmax Motor

Smooth operation at very low speed : Multiple pistons and double swash plate result in smooth operation at speed down to 1 rev/min.
High starting efficiency & high overall efficiency
Quiet operation
Unaffected by thermal shock.
Compact and easy to install.
Wide variation : 13Displacements from 99-4097 cm3/rev.
High pressure : Continuous operating pressure 27.5MPa & 24.5MPa.

  ORBITROL

ORBITROL is a hydrostatic(fully fluid linked)power steerling composed of a feedback meterring organization with a directional control valve and servo feedback operated with a very small power.
Minimizes steering linkages : provides flexibility in design,reduces cost.
Provides complete isolation of load forces from the control station : provides operator comfort.
Provides continuous,unlimited angle control action with very low input torque : provides proportional flow to input steering speed.
Provides continuous,unlimited angle control action with very low input torque : provides proportional flow to input steering speed.
Provides a wide selection of meter(Gerotor)sizes : from‚R‚Pcm2/rev to ‚R‚O‚R‚Qcm2/rev
Provides highly reliable engineering : provides safety steering.
  Torque Generator

For producing large output torque,input torque is only 2.0 N¥m.
With the input and output shafts in straight line(as in the case of steering columns), the rotayion ratio is one-to one(1:1).
This is extensivery applied to the steering systems of power vehicles and gates and valves needing large open-close drive torque.

 
  GEAR PUMP

Gear pumps are widely used in various fields;civil engineering and construction machinery,special and industrial vehicles,cargo-handling and transportation machinery,agriculture and forestry machinery,fishery machinery,and other equipment and systems.
The PA,PB and PC series gear pumps are designed for a rated pressure of 20.6MPa and superior in performance,durability,ease of use,and economy.
The PHB series gear pump is effect high-pressure of 24.5MPa.
Excellent Durability : Specifically designed plain bearing,highly wear-resistant,is adopted to minimize bearing seizure even in high-pressure,high-speed operation.
Lightweight and Compact : Made of aluminum alloy,the pump body is lightweight and compact.
High Efficiency : The PB and PC series models are of pressure loading type.Carefully computed pressure balance maintains higher efficiency. The PA series models,on the other hand,adopt a high '-precision wear-plate pressure balance mechanism.This provides for higher volumetric as well as mechanical efficiency.
Low Operating Noise : High-precision gears and anti-entrapment relief grooves allow very quiet operation.
PA series gear pump is possible to integrate a relirf valve,and lifting valve being direct-coupled to the outlet port of the PA series gear pump.
Wide Variations : There are a good many variations available to meet users' needs.Not just the single and tandem types but also the triple type are available.
 

  GEAR MOTOR

Gear motors are lightweight and compact from the designs using aluminum alloy. They feature very high motor-efficiency even under high pressure and light speed. Lots of different types and models are available for a wide range of industrial applications.
Amazingly Durable : Specifically designed plain bearing,highly wear '-resistant,is adopted to minimize bearing seizure even in high '-pressure,high-speed operation.
Pressure Loading Structure of High Performance : The series MB show high volumetric and mechanical efficiencies with least internal leakage based on the pressure balance of pressure loading system. The MA series,simple with a fixed side clearance,also shows very excellent efficiency derived from the simple design with precise matching.
Low Operating Noise : High-precision gears and anti-entrapment relief grooves allow very quiet operation.
Lightweight and Compact : Made of aliminum alloy,the motor body is lightweight and compact.
Wide Variations : There are a good many variations available to meet users' needs.
 

 
  STACK VALVE

Our stacked valve is compact and multi-configurated with various control function to meet with every hydraulic circuit which is now becoming more and more sophisticated and diversified.
Stacked multiple valve in compact size : One to ten combined blocks available according to the number of actuators together with combination of various function.
Reliable and easy operation : Smooth and reliable spool movement. Excellent inching operation by precision machined spool notches.
Each block has a load check valve.
Auxiliary valves can be installed : Overload relief valve&suction valve,can be installed on each cylinder port when necessary.

  SOLENOID STACK VALVE

Solenoid Stack Valve is multi-functional,versatile and very compact design.
The compact multi-stack valves can be flexibly laid out from one to ten blocks without having a manifold installed.
The multi-configurated valves are equipped with a neutral-position unload mechanism.
Using a continuous rating,water-resistant coil consuming less power.
Overload relief valve,suction valve,and other auxiliary valves can be installed according to applications.
Manual control can be available in case solenoid control is incapable.
The valves can be used in combination with manual control valves hand-operated and solenoid-controlled multiple setup.
 

 
  POWER PACK

Power Packs are small-sized,lightweight hydraulic power units integrating and compounding valves of several kinds and a tank with our long-established Gear Pump.
Highly efficient power packs with built-in PA Gear Pump for high-pressure applications.
Stable move-down performance guaranteed whether under big or small load.(pressure compensation provided)
Solenoid stack valve incorprated to activate a double-acting cylinder electromagnetically.
Small-sized,Thin and Compact : Space saving realized with the height of merely 13.7cm(for tank oil volume of 1.7 liter)and aluminum alloy used for oil tank and valve section.
Diverse variation : Parts of Series have been made interchangeable by standard-ization to meet users' diverse needs.
Various Input Sources Met : Three phase 200V,single phase 100V,DC12V & 24Vspecifications are available for motor.Various input sources can be met by recombining only the motor.

  LIFTING VALVE

This is a compact,lightweight,hgh-performance,multi-function valve serving three valve function - change-over,flow rate control,and check.Being direct-coupled to the outlet port of the PA series gear pump,the valve is integrated in the lifting circuit.
Combination valves consisting of load check valve,throttle valve and solenoid check valve.
Readily mountable to PA series gear pump(equipped inside with safety valve)to form a lifting circuit.
Cartridge design.
Stable move-down performance ensured under virtually all loads (pressure compensation provided).

  SOLENOID CHECK VALVE

 Poppet valves for little leakage.
Oil-immersed type with very low switching noise.
Cartridge design.
Energy saving type with lower electric consumption.

PUMP UNIT

 PA gear pump direct-coupled with motor with no coupling and common base required. Readily combinabl with flange having a relief valve and check valve.
 
  Eaton's Aeroquip Group, headquartered in Maumee, Ohio, is a worldwise leading manufacturer of a wide variety of fluid-conveying and fluid-connecting products.

Aeroquip Corporation was founded in 1940 in Jackson, Michigan, by Peter.F.Hurst, a young German aeronautical engineer who held the patent rights to manufacture two new products designed for the aviation industry-detachable,reusable hose fittings and self-sealing couplings.

During World War 2,Aeroquip products became military standards on all U.S.Aircraft, establishing the company's reputation as a quality supplier and leading the way to penetration of the emerging fluid power industry.

Aeroquip products include all pressure ranges of hose, fittings, adapters, couplings and other fluid connecters, as well as precision plastic molded and extruded products for the automotive and industrial markets.

The company became the Aeroquip Group of Eaton in 1999 and currently operates 36 facilities in 11 countries and employs nearly 8,000 people.

Eaton Fluid Power Ltd. became a company of 100% Eaton company investment in March,2001 and selling AEROQUIP products in Japan. From now on,all products of AEROQUIP are sold through our company.

Aeroquip
There is no equal !

You've seen "Aeroquip or Equal" on nearly every hose and fitting specification. Why? Because Aeroquip is the recognized leader in naval marine hose and fittings. Our competitors try to meet our standerd and even use our part numbers in their catalogs, but they simply cannot match the quality of Aeroquip products.
 
  Vickers brand is well-known in the global markets for almost eighty years.Vickers became the group of Eaton in 1999. Now Eaton has a very strong family of industrial and mobile products.

Vickers has a continuing commitment to provide its customers with quality products and system solutions.

Following catalogue highlights the spectrum of Vickers industrial and mobile hydraulic products. Its purpose is to provide a convenient reference tool when choosing Vickers products or designing a system using Vickers components.

It is divided into different sections according to the type of products. Each entry gives a brief description and basic specifications for a specific products. Should you require more detailed information for each products is also provided.

Vickers has the expertise needed to provide you with complete fluid power system solutions,including the huge product selections. We also offer in-depth knowledge of your market, and system design know-how to overcome design problems inherent in your market segment.

With manufacturing and design location around the world, we "speak your language". Our engineers understand your system needs and as well as regional differences.

With every Vickers system, you will receive support on a global scaleresearch, development and design; system application engineering; prompt delivery and expert service. Most important, you will get quality in everything we do for you.

So where you design, build or maintain industrial and mobile equipment for many applications, Vickers has dedicated resources to serve your market and provides unmatched expertise in system reliability.

Choose Vickers - for "system thinking" that will maximize the performance of your industrial and mobile application.